This page explains the Logger adapter in Bridge context. If you were looking for the same information regarding the PAS Designer, refer to Logger Adapter in the Designer guide.
With the <<Logger>> adapter you can write into the log file of the service. Use action log in this case.
The following picture shows the usage of the <<Logger>> adapter:
Tag action of the logger adapter needs to be set to log. The following input can be provided:
Error rendering macro 'multiexcerpt-include' : Page loading failed
Example
|
Pin |
Value |
|---|---|
|
level |
|
|
type |
|
|
code |
|
|
description |
|
|
details |
|
The output after running the example can be found in the xUML Service Standard Log of the xUML service:
...[Error][Internal][Stock_Synchronization][Item ID could not be found. Detail: e2e:type='ErrorDetail', element='AF-1201', value='Adapter']
In case of an array, the output would look something like:
... Detail: e2e:type='ErrorDetail', [0].element='AF-1201', [0].value='Adapter', [1].element='CD-2000', [1].value='Connector'