This page explains the URL Adapter in Bridge context. If you were looking for the same information regarding the PAS Designer, refer to URL Adapter in the Designer guide.

All URL adapter parameters, that are specified on the <<URLAlias>> in the component diagram, can also be supplied dynamically via action script. Find below a list of all relevant parameters of the URL adapter and their description.

With the URL adapter, it is possible to get and put messages via file transfer protocols: FTP, FTPS and SFTP. These protocols often get confused and mixed up due to the similarity in function and names. Please refer to Using the URL Adapter with the FTP Protocol and Related Protocols for a distinction and more information on the usage with the URL adapter.

Tagged Values

<<URLAlias>>

NameDescriptionAllowed Values / Examples
Protocol
(protocol)

Transport protocol.



one of: ldap, file, ftp, ftps, sftp, gopher, http (default), https, telnet
Port
(port)

Machine port number the service is binding to. This port number can be given at service level only.

a valid port number (default: 80)
Path
(path)

HTTP path for the SOAP request.


Host
(host)

Host name. Default is "localhost" if no value is specified.

a valid hostname (default: localhost)
Method
(method)

HTTP method of the URL adapter call. Default is "POST" if no value is specified.

one of: get, post (default), read, write, put, list
Advanced
Follow Redirects
(followRedirects)

The maximum number of redirects to follow.

any positive integer or 0
Ignore Http Errors
(ignoreHttpErrors)

If true, HTTP error codes > 300 will not cause an exception in the model. This implies, that the response body is accessible even if HTTP errors occur. The default value is false.

trueIgnore HTTP error codes > 300.
falseDo not ignore HTTP errors (default).
Options
(options)

Native cURL options as listed on Setting cURL Options on the URL Adapter .

Use one of the following syntax rules:

  • values separated by ',' in one line
  • values separated by ' ' in one line
  • list of tagged values
valid cURL options, e.g. CURLOPT_TIMEOUT=20
Request Http Header Roles
(requestHttpHeaderRoles)

client_hostProvide the client host in a header <http header name> instead of X-Sender-Host.
client_serviceProvide the client service in a header <http header name> instead of X-Sender-Service.
correlation_idProvide the correlation ID in a header <http header name> instead of X-Request-Id.
transaction_idProvide the transaction ID in a header <http header name> instead of X-Transaction-Id.
passthroughPass a present header <http header name> to the called service.
passthrough= <request header name> Pass an incoming header <request header name> to the called service under the name of <http header name>.
This is equivalent to renaming a header.
Dig est Algorithm
(digestAlgorithm)






Builder 7.12.0 Runtime 2021.1 Generates a HTTP  digest  header using the specified algorithm.  When applied, a  digest  header is generated using the specified algorithm, and sent with the request .  The generated header conforms with RFC3230 and RFC5843.

Only one value is supported (no multi-value header).





NoneNo header generated.

MD5

Generate header using MD5 algorithm.

SHA

Generate header using SHA algorithm.

SHA-1

Generate header using SHA-1 algorithm.

SHA-256

Generate header using SHA-256 algorithm.
SHA-512Generate header using SHA-512 algorithm.
Authentication
User
(user)
Username/password.
Proxy
Proxy URL
(proxyURL)

URL of the proxy server.


Proxy User
(proxyUser)

Proxy user.


Proxy Type
(proxyType)

Type of the proxy

one of: HTTP, SOCKS5

SSL
Ssl CA Info
(sslCAInfo)

Name of the file containing additional certificates for the connection verification (e.g. additional root CAs).



Ssl Certificate File
(sslCertificateFile)

Name of the file that contains the client certificate.



Ssl Private Key File
(sslPrivateKeyFile)

Name of the file that contains the private key.


Ssl Private Key Password
(sslPrivateKeyPassword)

Password for the private key.


Ssl Certificate Type
(sslCertificateType)

Type of the certificate.

one of: PEM (default), DER, P12

Ssl Verify Host
(sslVerifyHost)

Whether to verify the host information form the SSL connection.

OnVerification on (default).
OffVerification off.
ExistenceLimit verification to the mere existence of the host.
Ssl Verify Peer
(sslVerifyPeer)

Whether to verify the peer information from the SSL connection.

OnVerification on (default).
OffVerification off.
Ssl Private Key Type
(sslPrivateKeyType)

Type of the private key.

one of: PEM (default), DER, ENG

<<URLAdapter>>

Since Runtime 2022.6 the Runtime uses Transfer-encoding: chunked for POST requests. You can override this behavior by setting 

  • Transfer-Encoding: <empty string>
  • Content-Length: <length of the body>"
Tagged ValueTypeDescriptionAllowed Values

alias
Specify the URL alias the adapter should connect to.any valid URL alias
digestAlgorithm

Builder 7.12.0 Runtime 2021.1 Generates a HTTP  digest  header using the specified algorithm.  When applied, a  digest  header is generated using the specified algorithm, and sent with the request .  The generated header conforms with RFC3230 and RFC5843.

Only one value is supported (no multi-value header).

NoneNo header generated.

MD5

Generate header using MD5 algorithm.

SHA

Generate header using SHA algorithm.

SHA-1

Generate header using SHA-1 algorithm.

SHA-256

Generate header using SHA-256 algorithm.
SHA-512Generate header using SHA-512 algorithm.
headerParametersArray of HeaderField

Supply additional header information for the URL adapter call in form of name and value pairs (see type Header Field in table URL Parameter Types below.

The xUML Runtime assigns a correlation ID to each adapter call. This ID is stored in header field X-Bridge-CorrelationID. Adapter calls can be identified by this ID. Also, it is logged to the transaction log.

If you set this header manually, the new header will be send to the target URL. Nevertheless, the correlation ID logged to the transaction log will still be the one generated by the Runtime!


streaming
Specify a streaming method for the usage of file streaming with the URL adapter.noneNo file streaming (default).
fromFileStream to a file.
toFileStream from a file.

URL Adapter Parameters

Incoming Parameters

NameTypeDirectionRestrictionsDescription
to listed protocol onlyto listed method only
urlstringin

This parameter contains the URL that will be accessed by the adapter. The URL contains protocol, port and path.
contentBlobin
post, put, writeUse this parameter to supply the content to be used by the listed methods.
headerParametersArray of HeaderFieldinhttp, https
Use this parameter to supply additional header information for the URL adapter call in the form of name and value pairs.
methodStringin

This parameter provides the method of the URL adapter call.
authenticationAuthenticationinldap, ftp, ftps, sftp, http, https
This parameter provides an object of type Authentication containing the user and the password.
proxyProxyinldap, ftp, ftps, sftp, http, https
Use this parameter to supply necessary proxy information.
followRedirectsIntegerinhttp, https
Specify here the maximum number of redirects to follow.
sslSSLinhttps, ftps
Use this parameter to supply SSL information.
commandsArray of Stringinftp, ftps

Use this parameter to specify ftp commands. All commands are executed after executing the ftp method. For a list of available ftp commands see RFC 959.

optionsArray of Optioninldap, ftp, ftps, sftp, http, https
Use this parameter to specify cURL options for the URL adapter call.
streamSourceStringinftp, ftps, sftp, http, httpspost, putIf you want to use file streaming with streaming method fromFile, supply the streaming source here. Then, content is not used.
streamTargetStringinftp, ftps, sftp, http, httpsget, post, put, listIf you want to use file streaming with streaming method toFile, supply the streaming target here. Then, response is not used.
ignoreHTTPErrorsBooleaninhttp, https

Outgoing Parameters

NameTypeDirectionRestrictionsDescription
to listed protocol onlyto listed method only
responseBlobout
get, post, put, list, readContains the response content in relation to the used method.
httpStatusIntegerouthttp, https
Contains the HTTP status code of the response.
httpHeaderParameterArray of HeaderFieldouthttp, https

DeprecatedThis attribute is deprecated as of Runtime 2020.11. Please use httpHeaderMap (see below) for new implementations as its implementation complies to the HTTP specification.

Contains the HTTP headers of the response.

httpHeaderMapMap of EntryoutMap of Entry

URL Parameter Types

ClassAttributeTypeCURL OptionDescriptionValues/Example
AuthenticationpasswordString
Password needed for authentication.
usernameString
Username needed for authentication.
EntrykeyString
Key of the map entry.
valueArray of Any

List of values of the map entry. The dynamic type for httpHeaderMap is String.


HeaderFieldnameString
Name of the header field.
valueString
Value of the header field.
OptionnameString
Native cURL option.CURLOPT_CONNECTTIMEOUT
valueString
Value of the cURL option.10
ProxyauthenticationAuthenticationCURLOPT_PROXYUSERPWDProxy user.
typeStringCURLOPT_PROXYTYPEType of the proxy.HTTP, SOCKS5
urlStringCURLOPT_PROXYURL of the proxy server.
SSLcaInfoStringCURLOPT_CAINFOName of the file containing additional certificates for the connection verification (e.g. additional root CAs).
certificateCertificate
Client certificate
keyKey
Private key of client certificate
verifyHostStringCURLOPT_SSL_VERIFYHOST

Whether to verify the host information form the SSL connection.

OnVerification on (default).
OffVerification off.
ExistenceLimit verification to the mere existence of the host.
verifyPeerStringCURLOPT_SSL_VERIFYPEERWhether to verify the peer information from the SSL connection.OnVerification on (default).
OffVerification off.
KeyfileStringCURLOPT_SSLKEYName of the file containing the private key.
passwordStringCURLOPT_KEYPASSWDPassword for the private key.
typeStringCURLOPT_SSLKEYTYPEType of the key.PEM, DER, ENG
CertificatefileStringCURLOPT_SSLCERTName of the file containing the client certificate.
typeStringCURLOPT_SSLCERTTYPEType of the certificate.PEM, DER, P12