The following sections are ordered according the steps needed to create a component diagram and describe each creation step in detail.

Assigning the Diagram Name

After starting the Components Wizard, the first dialog opens and you are prompted to enter the name of the component diagram.

BRIDGE > Creating a Component Diagram > components_wizard_diagram_name.png

You may use the suggested default name or enter a descriptive name. Changing the name will change the name of the top most tree node (marked in blue) in the navigation panel.

Click Next to proceed or Cancel to abort.

The Components Wizard can be canceled any time.

BRIDGE > Creating a Component Diagram > components_wizard_cancel.png

After clicking cancel, the Components Wizard prompts for confirmation.

Defining the Composite

In the next step, you will define the service composite. The service composite represents the repository of the Web service and will contain all necessary configuration information.

BRIDGE > Creating a Component Diagram > components_wizard_composite_overview.png

Clicking Next after assigning the diagram name will bring you directly to the following dialog. Create the service composite here.

BRIDGE > Creating a Component Diagram > components_wizard_composite_standard_tab.png

Assign a name to the composite. In the field Control Port, enter an unused port number (the value needs to be between 20'000 and 29'999).

Special characters and blanks are not allowed for composite names.

BRIDGE > Creating a Component Diagram > components_wizard_composite_new.png

In case the Cancel button was accidentally pressed, the Create new Composite window can be re-opened by clicking the New button.

The Create New Composite dialog contains four more tabs.

	On the Advanced tab of this dialog you can configure the compiler as to create a WSDL per service define the WSDL namespace assign a category to the xUML service select whether you want the compiler to resolve class inheritances when generating the WSDL file Bridge 7 Using this option is deprecated. Bridge 7 specify a service version This service version will be visible in service context on the Bridge. select the SOAP version of the service specify a startup shutdown trace port For more information on these tagged values refer to Frontend Components .
	Specify the test settings here. generateTestService: Test Service Name: Test Port: Test Encoding: Test Proxy Host: Test Proxy Port: Test Proxy Protocol: Test Proxy Path: External Test Proxy Host: For more information on testing in general refer to QA Concepts.
	Using Persistent State features in the xUML service, you can make corresponding adjustments on the Persistent State tab configuring the persistent state engine. Owner specifies the owner of the persistent state objects. Default owner (used when no divergent owner is specified) is the xUML service name, which is unique on each node instance. For more information Persistent State Components.
	Using Java services in the xUML service, you can specify the JVM options here. JVM Options: killJVMThreadsOnShutdown: Parallel JVM Operations: For more information on Java Components refer to Modeling the Java Components.

Click OK to proceed.

Up to this point, you have defined the xUML service component EducationLesson3.

BRIDGE > Creating a Component Diagram > components_wizard_composite_window.png

In the customization panel, you will find the new xUML service component (e.g. EducationLesson3) in the list of added composites on the right side.

The left side of the customization panel contains available components, classes, or interfaces. The right side always contains the used components.

Click Next to proceed.

Defining the Frontend Service

In the next step, you define the frontend service that will be part of the xUML service.

Clicking Next after having defined the composite will bring you directly to the following dialog. Add a frontend service here.

	Select a service type from the list.
	In other cases, e.g. if you want to add additional services, you can open the above dialog by clicking New on Services level of the tree.

All possible frontend service stereotypes are listed:

E2EEventObserverService
E2EHTTPService
E2EJavaService
E2ESAPRFCService
E2ESchedulerService
E2ESOAPService
E2ETimerService

several ActiveMQ versions
GlassFishMQ-4.4
Weblogic-10.3
WebshpereMQ-6-NoJNDI
WebshpereMQ-7

XSLTProcessor
ApacheFOP
Saxon6 and 8
Xalan2
XalanTrax2

UIRepository

BRIDGE > Creating a Component Diagram > components_wizard_services_SOAP.png

This example shows how to define a Web service. Select the service stereotype E2ESOAPService.

Proceed with OK.

BRIDGE > Creating a Component Diagram > components_wizard_services_new.png

Now, customize the service artifact.

Assign a Name.
Assign a Port, to which the SOAP service is listening (the value needs to be between 10'000 and 19'999).
Select an encoding. See Encoding of SOAP Operations for more information on SOAP encoding and the E2E Bridge.
Timezone:
Date Format String:

The Create New SOAP Service dialog contains two more tabs.

	On the Advanced tab, you can specify the following settings: Wsdl Namespace: Authentication Mode: User: Specifies user and password for the use of HTTP Basic authentication. For detailed information on these tagged values refer to SOAP Service Reference.
	On the Proxy tab, you can specify the proxy details. Proxy Host: Proxy Path: Proxy Protocol: Proxy Port: External Proxy Host: For detailed information on these tagged values refer to SOAP Service Reference.

Proceed with OK.

Now, in the component diagram the service component is placed within the service composite component.

BRIDGE > Creating a Component Diagram > components_wizard_services_added.png

In the customization panel on the right, you will find the new service (e.g. QueryProductsService).

Click Next to proceed.

Defining the SOAP Service Interface

In the next step, you will define the interface of the SOAP service. Through this interface, the Web service is accessible from the outside world.

BRIDGE > Creating a Component Diagram > components_wizard_soap_port_overview.png

BRIDGE > Creating a Component Diagram > components_wizard_soap_port_add.png

The Components Wizard lists all port type classes on the left. Select a port type and click the button > to add the port type to the composite.

BRIDGE > Creating a Component Diagram > components_wizard_soap_port_new.png

In the following dialog, assign a name to the port type or use the default name suggested.

Special characters and blanks are not allowed for component names.

Provide a Namespace if necessary.
Provide a path, if you want to make this component independent of the package structure. Without a given path, port types are identified by port type name and package URL.

Proceed with OK.

BRIDGE > Creating a Component Diagram > components_wizard_soap_port_added.png

In the artifact part oft the customization panel, you will find the added port type QueryProductsPortType.

As an interface can only be used once in a composite, the port type QueryProductsPortType is not displayed anymore in the SOAP Port Types list on the left.

Each port type class (representing the interface of the SOAP service) can only be used once in a composite.

Click Next to proceed.

BRIDGE > Creating a Component Diagram > components_wizard_services_skip.png

In the Customized Artifacts part of the tree panel, the xUML service is selected again, to give you the option to define further frontend services (see Defining the Frontend Service).

If you do not need any further elements, click Skip.

BRIDGE > Creating a Component Diagram > components_wizard_skip.png

For definition of Backend Services (Aliases/Resources) see below (Defining Backend Aliases).

For Finishing the Components Wizard see Finishing the Components Wizard.

Defining Backend Aliases

In this step, backend aliases are defined. The Components Wizard provides predefined Backend Components.

BRIDGE > Creating a Component Diagram > components_wizard_alias_overview.png

	Click New to create a new backend alias ...
	...or select an existing alias and click > to add it to the component diagram.

For adding a new alias, choose one of the following possible backend service stereotypes:

Backend Aliases
FileSystemAlias JMSAlias POP3Alias SAPAlias SMTPAlias SOAPAlias SQLAlias URLAlias

BRIDGE > Creating a Component Diagram > components_wizard_alias_select.png

Choose a backend alias stereotype from the list of available stereotypes, e.g. FileSystemAlias and click OK.

BRIDGE > Creating a Component Diagram > components_wizard_alias_file_new.png

Assign a name to the alias or leave the default name suggested.

Specify File Name and Path, or, if you wanted to read data from an imported resource, select the resource from the Resource drop-down box instead.

Click OK.

BRIDGE > Creating a Component Diagram > components_wizard_alias_file_added.png

In right part oft the customization panel, you will find the new file system alias (e.g. ProductCatalog).

Click Next.

Finishing the Components Wizard

This is the final step of the Components Wizard. You need to confirm to draw the component diagram. If the definitions are not complete yet, you may select an element node in the tree panel and add further UML elements to the diagram.

BRIDGE > Creating a Component Diagram > components_wizard_finish.png

The Components Wizard generates the component diagram. If no errors occurred, it is necessary to save the model. On saving, the deployment data of the Model Compiler gets refreshed and you can proceed with e.g. compiling the model.